gear4bikes.com (UK)




Search for parts by make: Honda - Kawasaki - Suzuki - Yamaha - Aprilia - BMW - Triumph

FREE delivery on mainland UK orders over £100!



Heat Pro Heated Back PadHeat Pro Heated Back Pad
*** Perfect for BMW riders or any bike with an auxilliary power socket ***

Great new German designed and manufactured product. So simple it's brilliant!

Turns almost any jacket into a heated one. Heated pad slips in the same pocket along with your back protector with simple 12v plug. Great in winter, great on cool summer evenings with your lightweight sports jacket. Easily switches from jacket to jacket.

Only 1mm thick, so easy to install.
12V / 35W maximum draw - less than 4A.
Heats quickly to 37 degrees, with automatic temperature regulation to prevent overheating.
Combi fused plug, fits both standard cigarette lighter and DIN / Hella / BMW type sockets (not supplied, but easily fitted, see Yamaha photo).

Light, unobtrusive, no bulky liners - a real boost on cool summer evenings and cold winter days. No complicated wiring, easy to fit, easy to use, easy to swap from jacket to jacket.

Note - this does not replace the back protector, it slides in as well as the protector.

NORMAL PRICE £45.00 (Heatpro) 
View more images


Price:   £40.00 


Haynes Honda CB750-Four Mug

Honda CB750-Four

Released in 1969, the Honda CB750-Four was the first modern four cylinder machine to be mass-produced. It set new standards in performance and reliability, and offered features previously unseen on affordable mainstream motorcycles. Regarded as "the most sophisticated production bike ever" upon its introduction, the CB750 has come to be known as the world's first true "Superbike".

What you need to know

Haynes Honda CB750-Four mug is an ideal gift or treat for any motorcycle enthusiast. Packaged in a sturdy red coloured display box, with inspired images from Haynes original manual. Weight 400g, volume 300ml, diameter 80mm, height 95mm.

Box size 120 x 90 x 100mm
 
View


Price:   £3.95 

Haynes Honda CB750-Four Mug


Haynes Suzuki GT380 MugHaynes Suzuki GT380 Mug

Suzuki GT380

Production of the Suzuki air-cooled two-stroke triple GT380 started in 1972 and lasted until 1978. It was a massive bike, that was both sporty and reliable, although it became slightly unpredictable at high speeds. Beautifully styled, the GT380 is a classic Japanese motorcyle.

What you need to know

Haynes Suzuki GT380 mug is an ideal gift or treat for any motorcycle enthusiast. Packaged in a sturdy turquoise coloured display box, with inspired images from Haynes original manual. Weight 400g, volume 300ml, diameter 80mm, height 95mm.

Box size 120 x 90 x 100mm
 
View


Price:   £3.95 


Enduro/Trailbike/Greenlane Tool Tube

Enduro/Trailbike/Greenlane Tooltube with OR without drillable top lug.

These tubes are the best option for carrying tools off-road.

They are long enough to carry 240mm (9") tyre levers plus all your trail tools (spanners etc.) and unlike tool bags these are 100% waterproof due to the seal incorporated in the cap.

There’s no zip to break or come undone so you won’t lose your tools and they won’t rust in the wet.

Ideal to mount under rear fender opposite exhaust as shown.

Robust design that won’t shatter or crack made of impact resistant poly-plastic with stainless steel fittings and supplied with 4 s/s washers, 2 s/s 6mm cap screws, 2 s/s 6mm nuts.

Optional drillable lug to mount or clamp where you want.

A bracket could be made by buyer to mount to sub-frame etc. Overall length 300mm approx by 90mm OD, and lug size 100mm by 40mm. Sprung fastened end cap with seal - can be made totally secure with R-clips or split pins, etc.

Tested extensively off road and on the trail - these are VERY, VERY tough indeed!!
 
View detailed image


Price:   £27.95 

Enduro/Trailbike/Greenlane Tool Tube
Lug


14 LED Head Torch14 LED Head Torch

14 LED Head Torch with four modes:
  • 4 LED on
  • 8 LED on
  • 14 LED on
  • 14 LED flashing

Features:
  • Ultra bright white LEDs
  • Long lifetime LEDs (100,000 hours)
  • Adjustable head strap
  • Adjustable ratchet head tilt system
  • Typical 30-180 hour burn time (depending on mode used)

Uses 3 x AAA batteries (included)
 
View


Price:   £3.95 


W07-00001 - ROK Adjustable Motorcycle Stretch Straps - 1400 x 25mm Twin Pack

Adjustable and elastic luggage straps. Designed to fit bike lugs, frames and carry racks, allowing immediate access to your luggage. The adjustable length caters for the largest range of luggage shapes and sizes.

Confidently secure 40kg in all weather conditions.

The unique closed-end fastening system ensures there are no dangerous steel hooks that could cause damage or injury.

Flat shock cord minimises pressure on goods/load.

5 times stronger than other luggage straps. 12 month manufacturer warranty.

Adjusts from 450mm to 1400mm, width is 25mm. Pack of two straps.

Part number W07-00001
 
View


Price:   £17.95 

W07-00001 - ROK Adjustable Motorcycle Stretch Straps - 1400 x 25mm Twin Pack


W07-00307 - ROK Small Adjustable Motorcycle Pack Straps - 1060 x 15mm Twin Pack   W07-00307 - ROK Small Adjustable Motorcycle Pack Straps - 1060 x 15mm Twin Pack

Smaller version of the ROK Strap.

Adjustable and elastic luggage straps. Designed to fit bike lugs, frames and carry racks, allowing immediate access to your luggage. The adjustable length caters for the largest range of luggage shapes and sizes.

The unique closed-end fastening system ensures there are no dangerous steel hooks that could cause damage or injury.

Flat shock cord minimises pressure on goods/load.

Permanent attachment using pass through webbing loops.

12 month manufacturer warranty.

Length adjusts from 310mm to 1060mm (12" - 42"), width is 15mm. Pack of two straps.

Part number W07-00307 


Price:   £8.95 


W07-00119 - ROK Motorcycle Bungee Strap - 750 x 20mm

Universal Elastic Bungee 30" in length

* Double looped, rubber sealed high tensile steel hook
* Air gap in hook centre allows other end to loop through
* Double and cross stiting is stonger than steel hook
* Nylon outer braid is UV stable to protect rubber from sunlight
* Oval moulded natural rubber cord lies flat without rolling

Part number W07-00119

(Rokstrap bungee - 750 x 20mm / 30 x 3/4 inches) 


Price:   £9.85 

W07-00119 - ROK Motorcycle Bungee Strap - 750 x 20mm


C52-001 - Daytona Heated Grips 12V 7/8"C52-001 - Daytona Heated Grips 12V 7/8"
Daytona Heated Grips are a recognised quality product providing essential heat for the riders hands during winter months. Simple fitting, with easy wire lead connections. The instructions include specific wiring advice for Honda, Kawasaki , Suzuki & Yamaha. The grips have two layers of rubber for durability and a soft feel grip for comfort. The controls have three settings, start, on and off. The start setting enables a swift warm up, following this the rider switches them to the 'on' position for use. The grips have a power bleed of 57W when in the start position and 14W in the 'on' position.
Suitable for 7/8 inch bars. 125mm length.
Open ends allow original bar ends to be retained. 


Price:   £49.95 


C52-007 - Motopro Heated Grips 12V 7/8"

Motopro Heated Grips provide continual comfort in cold conditions.
Latest materials resistant to low temperatures - resists cracking.
Adjustable heat control keeps riders hands comfortable in any conditions
Relay switch protection
High quality switch tested to 100,000 usages
High quality construction assures long life
Can be installed easily, no glue required.
Suitable for 7/8 inch bars. 125mm length.
Open ends allow original bar ends to be retained.

High Quality - Fully Guaranteed
 
View


Price:   £39.95 

C52-007 - Motopro Heated Grips 12V 7/8"


Symtec Heated Grip Kit Symtec Heated Grip Kit
These are a great, must have accessory. Two stage heated grips keep you comfortable and warm. Riding with these really do extend your riding season!
Superb quality US-made grip heater kit. Fed up with harsh, hard rubber heated grips from other manufacturers? Then we have the answer. This quality kit allows the heating elements to be fttted neatly and discretely under the original manufacturer grips or your own favourites.

Easy to install, with two stage heat settings, the kit is suitable for all types of bike, tourers, sports, nakeds and off-road / enduro bikes.

The kit consists of two heating elements on flexible mylar tape that attaches to your handlebar (clutch side) and throttle tube (throttle side) via permanent adhesive on the back. The right and left heaters are different, to accommodate lower heat tolerance of plastic throttle tubes. They draw 3 amps (36W) on the high position. No external resistor or other parts are needed to install. Available with either a 3-position (off, high, low) metal toggle switch or surface-mount round rocker switch

These grip heaters provide you with an effective and convenient way to keep your hands and fingers warm, without having to use bulky and awkward winter gloves. If you've never used heated grips before, you'll be amazed how much you do use them, once fitted and how you ever managed before!!

These grip heaters have been raved about on bike forums all over the net and are now available in the UK.

Please specify type of switch required - metal toggle (recommended for off road, ease of use with gloves) or round rocker (recommended for neat dash fit on sports bikes and tourers).
 
View


Price:   £41.50 

Switch Type


592074 - Deluxe Chrome Tax Disc Holder
Deluxe chrome tax disc holder with screw on front. Simple, classic design. 
View


Price:   £9.95 

592074 - Deluxe Chrome Tax Disc Holder


Y9000 - Fibre-Lyte Carbon Fibre Tax Disc HolderY9000 - Fibre-Lyte Carbon Fibre Tax Disc Holder
We searched all over to find the very best quality tax disc holder on the market and here it is!

Totally waterproof, this secure tax disc holder is fitted with an O-ring to ensure a watertight seal. For a 100% secure seal smear the O-ring with a little Vaseline or silicone grease. Beautifully made from Twill Weave carbon fibre.

Supplied with Allen key and mini-spanner. Made in England. 


Price:   £18.95 


Y9000S - Fibre-Lyte Carbon Fibre Tax Disc Holder with Silver Bezel
Totally waterproof, this secure tax disc holder is fitted with an O-ring to ensure a watertight seal. For a 100% secure seal smear the O-ring with a little Vaseline or silicone grease. Beautifully made from Twill Weave carbon fibre with a silver anodized aluminium bezel.

Supplied with Allen key and mini-spanner. Made in England. 


Price:   £18.95 

Y9000S - Fibre-Lyte Carbon Fibre Tax Disc Holder with Silver Bezel


Y9000G - Fibre-Lyte Carbon Fibre Tax Disc Holder with Gold BezelY9000G - Fibre-Lyte Carbon Fibre Tax Disc Holder with Gold Bezel
Totally waterproof, this secure tax disc holder is fitted with an O-ring to ensure a watertight seal. For a 100% secure seal smear the O-ring with a little Vaseline or silicone grease. Beautifully made from Twill Weave carbon fibre with a gold anodized aluminium bezel.

Supplied with Allen key and mini-spanner. Made in England. 


Price:   £18.95 


Y9001 - Fibre-Lyte Carbon Fibre Silver Shadow Tax Disc Holder
Totally waterproof, this secure tax disc holder is fitted with an O-ring to ensure a watertight seal. For a 100% secure seal smear the O-ring with a little Vaseline or silicone grease. Beautifully made from Twill Weave carbon fibre in a Silver Shadow style.

Supplied with Allen key and mini-spanner. Made in England. 


Price:   £18.95 

Y9001 - Fibre-Lyte Carbon Fibre Silver Shadow Tax Disc Holder


310000 - Large Digital Clock310000 - Large Digital Clock
High quality, stick on digital clock with large, easy to read digits. Two mounting brackets provided: one self-adhesive and one that can clip on to a vent, etc. Either way, you can remove the clock when you need to wash the bike.

This clock isn't waterproof, but we've found that if it's mounted behind a screen so that it's protected from the worst of the elements, and it's removed if the bike is left out in the rain, then it should be fine. 


Price:   £8.95 


W18-MC8 - Sigma Sport MC8 Digital Speedo
This useful gadget is not only an accurate speedo, it doubles as a clock and has multiple functions such as a trip meter, distance, stopwatch, average speed read out and maximum speed recall in mph or kph. It reads top speed of up to 183 mph (300 kph) and is accurate to 1/100th of a mile. Simply mount the unit onto the handlebar, key in the front wheel circumference in millimetres and off you go.

The MC8 features
. Robust construction
. Easy to use
. Rim or Spoke magnet
. Extra thick cable

Dimensions of speedo head unit (looking at the display):

Width 41mm x height 45mm x depth 17mm


Part No. W18-MC8 
View


Price:   £27.99 

W18-MC8 - Sigma Sport MC8 Digital Speedo


W45-DG8 - Acumen Digital Gear Indicator (Blue)W45-DG8 - Acumen Digital Gear Indicator (Blue)
The Acumen DG8 is supplied as a plug-in head unit with a plug-in extension lead (over 1.5 metres total length) for a universal fit.

Easily installed using basic tools and a soldering iron. Full installation and set-up guide included.

Suitable for bikes fitted with electronic speedo and tacho.

Part No. W45-DG8-BLUE 


Price:   £64.99 


W45-CONVERTER - Speedo Cable Upgrade Kit for DG8
The DG8 is designed for bikes with digital speedometers but purchasing this Speedo Cable Upgrade Kit will provide the output you need even when your bike is fitted with a cable speedometer. Simple to fit, comes with instructions and fittings.

Part No. W45-CONVERTER 


Price:   £40.82 

W45-CONVERTER - Speedo Cable Upgrade Kit for DG8


W50-10123 - Acumen CAT3 Alarm (with remote control) DIY FitW50-10123 - Acumen CAT3 Alarm (with remote control) DIY Fit
Easy DIY fitting - easy to use remote controlled motorcycle alarm.

Features:
Waterproof remote control transmitter with LED display/status indicator.
State-of-the-art movement sensor - senses shock AND movement.
User-defined Nudge Sensor - helps ward off attack.
Diagnostics - know why your alarm has reacted.
100% waterproof with ear-piercing 115dB siren.
Audible and visual confirmation of arming and dis-arming.
Ferry mode.
2 year manufacturer guarantee.

Easy DIY fitting - despite the advanced functionality of the system the Acumen CAT3 can be installed effectively by simply connecting just three wires. One to the battery, one to the frame and one to a power source that comes on with the ignition. All other wires are optional and provide additional functionality if required. An easy to follow instruction manual is included in the box. 


Price:   £99.99 




Featured Product: Optimate 4 Battery Chargerjust £42.95!

Honda   |   Kawasaki   |   Suzuki   |   Yamaha   |   Aprilia   |   BMW   |   Triumph

Home   |   Catalog   |   Search   |   Links   |   Info   |   FAQ   |   eBay Feedback



Motorcycle | Books | Music | DVD | Video | PSone | PS2 | PSP | Xbox | Hardware | Digital Cameras | DVD Players | Micro Systems | Televisions | MP3 Players | CD Players | Phones | Mobile Accessories